HT30V constant pressure sensor packaged in a 316L stainless steel housing

• Type: Piezoresistive Pressure Sensor
• Component: SemiConductor Type
• For: Diffused Silicon Pressure Transmitter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HT30V
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Thread Type: Customized
• Wiring Type: Four-Wire
• Measuring Medium: Gas and Liquid
• IP Rating: IP65
• Certification: RoHS
• Customized: Customized
• Power: 10VDC
• Output: mv
• Thread: OEM
• Range: 0-10kpa~20mpa
• Transport Package: Carton
• Specification: thread
• Trademark: HengTong
• Origin: China
• HS Code: 9026209090
• Production Capacity: 50000PCS/Year
• Package Size: 14.20cm * 5.50cm * 8.00cm
• Package Gross Weight: 0.500kg
• Lead Time: 2 days (1 - 2 Pieces) ; To be negotiated ( > 2 Pieces)

Product Description

constant voltage  pressure sensor packaged in 316L stainless steel housing

HT30V Silicon Piezoresistive Pressure Sensor

Introduction: 
 HT30V employs a highly stable diffused silicon element, making it a reliable silicon piezoresistive pressure sensor. By utilizing an isolation diaphragm and silicon oil, the sensor accurately measures the pressure of liquids and gases,offering precise results. Its extensive applications in air compressors and refrigeration systems make it a valuable asset in various industries. 

Product  Features:

1. Utilizes thick-film circuitry for temperature compensation and zero offset correction.
2. High reliability and excellent stability  .
3.  Constant voltage power supply, standard output

Applications:

1. Suitable for measuring non-corrosive gas and liquid pressure with 316L stainless steel compatibility
2. Used in process control systems for monitoring and controlling pressure.    
3. Commonly used in refrigeration systems and air compressors for pressure measurement.

Electrical performance:

1. Power Supply: ≤10VDC
2. Common Mode Voltage Output: 50% of the input (typical)
3. Input Impedance:4KΩ~20KΩ
4. Output Impedance:2.5KΩ~6KΩ
5. Electrical Connection:100mm high-temperature wire,ribbon cable

Performance Parameters:
Measurement Range		Gauge(G)	10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa
		Absolute(A)	100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA
		Sealed(S)	3500KPaS,7MPaS,10MPaS,20MPaS
		Typ		Max	Unit
NonLinearity		±0.15		±0.3	%F.S
Repeatability		0.05		0.1	%F.S
Hysteresis		0.05		0.1	%F.S
Zero Offset Output		0±1		0±2	mV
Full Scale Output	≤20KPa	50±1		50±2	mV
	≥35kPa	100±1		100±2	mV
Zero Offset Temp. Drift	≤20KPa	±1		±2.5	%F.S
	≥35kPa	±0.8		±1.5	%F.S
Full Scale Temp. Drift	≤20KPa	±1		±2	%F.S
	≥35kPa	±0.8		±1.5	%F.S
Compensated Temp.	≤20KPa	0~50			ºC
	≥35kPa	0~70			ºC
Operating Temperature		-20~80			ºC
Storage Temperature		-40~125			ºC
Allowable Overload		Take the smaller value between 3 times the full scale or 120MPa
Burst Pressure		5X the full scale
Long-term Stability		0.2 %			F.S/Year
Diaphragm Material		316L
Insulation Resistance		≥200MΩ 100VDC
Vibration		No change under conditions of 10gRMS, 20Hz to 2000Hz
Shock		100g,11ms
Response Time		≤1ms
O-ring Seal		Nitrile rubber or Fluoro rubber
Filling Medium		Silicon Oil
Weight		~63g
The parameters are tested under the following conditions:   10V @ 25ºC

 

 

Outline Construction
Dimension
Notes: The thread size of the pressure sensor can be customized

Electrical connection and compensation

 

 

 

 

 

 

 

Selection Examples

Ordering tips

1. Pay attention to the fit between the core size and the transmitter housing during assembly to achieve the         
     required airtightness
2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.
3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when      placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.
5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into          the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on the actual core for reference.
 

company

 

 

Q&A

 

1.Q: What are the features of your pressure sensor transmitters?

   A: High precision, durability, and excellent performance. Customization available.
 

2.Q: Can I customize special specifications?

   A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service
 

3.Q: What is your production capacity?

    A: Our manufacturing facilities can produce up to 30,000 pressure sensor transmitters per month, so we are fully capable of meeting the needs of large-scale orders. However, it is advisable to contact our sales team in advance to ensure smooth production and delivery scheduling
.

4.Q: What's the typical delivery period?

    A: 5~8 working day for standard models. Customized products may vary.
 

5.Q: How are the products priced? Any discounts?

    A: Competitive pricing with discounts for bulk orders or long-term partners
.

6.Q: What is the warranty of your products? And after-sales service?

    A: Our warranty time is 24 months after shipment, and our after-sales will respond with your questions in 24hrs, remote          instruction by PC network is always available.