4-20mA 0.5-4.5V I2C Pressure Transmitter Sensor for Water Air Gas

• Type: Piezoresistive Pressure Sensor
• Component: oil filled
• For: Diffused Silicon Pressure Transmitter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BP9325
• Output Signal Type: I2C
• Production Process: oil filled
• Material: Stainless Steel
• Thread Type: ZG
• Wiring Type: Four-Wire
• Measuring Medium: Liquid
• IP Rating: IP65
• Certification: ISO
• Customized: Customized
• Thread: 1/4NPT G1/4 and so on
• power: 3.6V
• Cable: 1.5m or OEM
• mark: ODM
• Transport Package: Carton
• Specification: 0-10kpa~60mpa
• Trademark: HTsensor
• Origin: China
• HS Code: 9026209090
• Production Capacity: 5000PCS/Month
• Package Size: 14.20cm * 5.50cm * 8.00cm
• Package Gross Weight: 0.300kg

Product Description

4-20mA 0.5-4.5V I2c IoT Pressure Transmitter Sensor for Water Air Gas
BP9325-I2C Silicon Piezoresistive Pressure Sensor

Product Introduction 

The BP9325-I2C pressure sensor adopts our self-developed HT series silicon piezoresistive isolation membrane oil-filled core as the signal measurement element. The signal processing circuit is located inside the stainless steel housing, converting the sensor signal to a standard IIC output signal. The product has undergone rigorous testing and aging screening for components, semi-finished products, and finished products, ensuring stable and reliable performance.

Product Features

1. Economical and compact.
2. Dual 24-bit ADCs for pressure and temperature acquisition.
3. Standard I2C communication protocol.
4.  All stainless steel 316L material.

Applications and Industry

1. Pressure measurement for non-corrosive media to 316L stainless steel.
2. Industrial process sites such as petroleum, chemical, metallurgy, etc.
3. Shipbuilding and aerospace industries.
4. Hydraulic and pneumatic control systems.
5. Internet of Things (IoT).

.

Performance Parameters
Range	-100kPa…0 ~ 35kPa…3.5MPa...60 MPa
Pressure Type	Gauge pressure, absolute pressure
Power Supply	3.0V ~ 3.6V DC
Output Signal	Digital I2C (pressure, temperature)
Overload	≤ 1.5 times the rated range
Accuracy @ 25ºC	±0.25% (typical), ±0.5% (maximum)
Repeatability and Hysteresis	0.02% F.S (typical), 0.05% F.S (maximum)
Long-term Stability	±0.1% F.S/year (typical), ±0.2% F.S/year (maximum)
Zero Temperature Drift	±0.02% F.S/ºC (≤100KPa), ±0.01% F.S/ºC (>100KPa)
Full Scale Temperature Drift	±0.02% F.S/ºC (≤100KPa), ±0.01% F.S/ºC (>100KPa)
Frequency Response	2.4Khz
Compensation Temperature	-20-70ºC(≤10MPa, customizable)
Operating Temperature	-30ºC~80ºC
Storage Temperature	-40ºC~120ºC
Continuous Operating Current	<3 mA DC
Housing Material	304,316L
Diaphragm Material	316L
Insulation Resistance	50MΩ @50V DC
Protection Grade	IP65
O-ring	Fluororubber
Weight	~0.4kg

Dimensions

 

Electrical Connection
	Red	V+
	Yellow	V-
	Blue	SDA
	Green	SCL

Communication Protocol
BP-I2C uses the I2C bus protocol for communication with external devices. All data communication starts from MSB, with the default 7-bit I2C device address being 0x78. BP-IIC acts as an I2C slave device, and the master device can communicate with it using the following command formats::

Input Request Command


Read 5 bytes of calibrated bridge and temperature values
When BP-I2C is set to digital output (using I2C 0xAC command), B[23:0] will be output in three bytes respectively. Users can easily convert to percentage using the following formula::

 

When using the 0xAC I2C command to read out the calibrated 5-byte data, the temperature information is provided by the last two bytes of 16-bit data. Users can easily convert the T value to actual temperature using the following formula:

Note: The bridge default is 10%~90%, the sensor bridge zero point corresponds to 10%, the full point corresponds to 90%. The sensor default does not output temperature values. Temperature output requires customization..
 

Selection Reminder

1.Ensure the core size matches the transmitter housing during assembly to achieve the required airtightness.
2.Assemble vertically and press evenly to prevent jamming or damaging the compensation board.
3.The measured medium must be compatible with the core diaphragm housing (316L) material. Otherwise, specify special requirements when ordering.
4.Do not press the sensor diaphragm with sharp objects to avoid deformation or perforation causing core damage.
5.Keep the vent tube of the gauge core open to the atmosphere.
6.If there are changes to the pin leads, refer to the label attached to the core.